Anti Slip Standard GRP Decking Strips

Our Anti Slip Standard GRP Decking Strips are an affordable solution to your slippery decking. They come pre-drilled and supplied with zinc plated decking screws. Option to upgrade to stainless steel decking screws available below under "You may also be interested in".

Stock Code:DGSDS50X1200B

Why Choose Anti Slip Standard GRP Decking Strips?


  • Ideal for - domestic home decking, shopping centre decking, restaurant decking, nightclub decking and other commercial decking areas.
  • Quick and easy installation - our strips come with pre-drilled holes and screw fixings, so all you need is a drill and you're ready to go. No glue is required to install the product.
  • Aesthetically pleasing - when applying to timber decking, our stone decking strips easily blend into the existing environment.
  • Design with a chamfered edge - to provide additional safety and reduce any further possibility of trips and falls.
  • 5 Year Guarantee against breakage.

n.b. Sold in single lengths.


  Standard  Heavy Duty
Grit Type: Standard Heavy Duty®
Ideal For: Commercial premises Industrial premises
Pedestrian Traffic Level: Light - Medium Heavy
Prices From: £4.28 £5.70
Thickness: 3mm with Chamfered Edges 3mm with Chamfered Edges
Guarantee: 5 Years 10 Years

How to Install

  • Our Anti Slip Standard GRP Decking Strips come with predrilled holes and zinc plated fixing screws, so all that is needed is a suitable drill. If zinc plated screws aren't suitable, you can upgrade to our Stainless Steel Decking Strip Screws for a rust-free option.



  • Ensure that the area is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be repaired to provide a reasonably flat and consistent surface.

  • Dry fit decking strips to ensure they fit freely and that they sit flat down on the surface. If required, our decking strips can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

  • Once you have the decking strips in the correct place, using a marker, mark through the pre-drilled holes onto the substrate.

  • Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.



  • Place strips in position and then using the screws provided, drill through pre-drilled holes and into the substrate. Repeat on all of the pre-drilled holes.

  • If drilling into hardwood, a pilot hole may be required.

  • Please note - you must use the screws provided as wood contracts and expands at a different rate to fibreglass, and these screws allow for movement to help eliminate bowing or splitting. A stainless steel upgrade is also available.

  • Please note - you must not overtighten the screws as this will inhibit movement needed when the wood contracts or expands.



  • Whilst decking strips are extremely resilient to dirt and contaminants, they can in particularly harsh environments become dirty. Dirt and debris can easily be removed using a stiff brush and should be carried out on a regular basis.

  • If decking strips have been subjected to spillages or the dirt has become embedded, detergents such as SlipGrip Degreaser can be used. It is always advisable to test any cleaning product on the decking strips before starting the cleaning procedure - this can be done in an inconspicuous area of the installation.

  • Using the detergent, warm water and a suitable brush, scrub the areas until clean. The excess water can be removed using a wet/ dry vacuum cleaner or suitable absolvable materials.

  • Where circumstances allow, decking strips can be power washed without causing harm, though care should still be taken.

Technical Data Sheet

Mechanical Data Sheet




  • Lengths: 1200mm or 2400mm
  • Width: 50mm or 90mm
  • Thickness: 3mm at thickest point (less on the chamfered edge)


  • Black
  • Stone

Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.


Order Value United Kingdom Mainland
£100 and under £9.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £35.00
£750.01 to £1000 £42.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £45.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £45.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.


* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.